TaskCam Development Library

The current TaskCam uses second generation hardware based on our TaskCam Arduino Shield which is available here. Previous versions are TaskCam are documented here and available to everyone to download and modify. Although these designs and hardware have been superseded, they are archived here for the curious and those maintaining legacy TaskCams .

In addition, we have also added some alternative designs for TaskCam 2.0. Some of these are more developed than others and so each design contains a description of the intended usage and details of any known issues.

 

  TaskCam   Prototype   This was one of our first designs for a TaskCam using standard parts including the legendary Nokia 3310 screen.   m  ore

TaskCam Prototype

This was one of our first designs for a TaskCam using standard parts including the legendary Nokia 3310 screen.  more

  3D Printed TaskCam mark one   This camera uses our first generation Arduino shield and Linksprite JPG camera.  m  ore

3D Printed TaskCam mark one

This camera uses our first generation Arduino shield and Linksprite JPG camera. more

  Paper TaskCam mark one   This a paper clad version of our first generation TaskCam.  more

Paper TaskCam mark one

This a paper clad version of our first generation TaskCam. more

 
  Paper TaskCam 2, long   The design is a simplest of all TaskCam enclosures as uses the TaskCam Arduino Shield in an unmodified, straight out of the box state  more

Paper TaskCam 2, long

The design is a simplest of all TaskCam enclosures as uses the TaskCam Arduino Shield in an unmodified, straight out of the box state more

  Paper TaskCam 2, matchbox    The most pared back TaskCam uses only the camera module and coin cell battery to create a match-box sized Cultural Probe camera  more

Paper TaskCam 2, matchbox

 The most pared back TaskCam uses only the camera module and coin cell battery to create a match-box sized Cultural Probe camera more

  3D Printed TaskCam 2, lightweight frame  An alternative configuration of the TaskCam Arduino Shield housed in a lightweight 3D printed shell and lasercut acrylic cover  more

3D Printed TaskCam 2, lightweight frame
An alternative configuration of the TaskCam Arduino Shield housed in a lightweight 3D printed shell and lasercut acrylic cover more

 
  3D TaskCam 2, long   Like the Paper TaskCam 2 long, this design houses the unseparated TaskCam Arduino Shield in a lightweight, clip together 3D print  more

3D TaskCam 2, long

Like the Paper TaskCam 2 long, this design houses the unseparated TaskCam Arduino Shield in a lightweight, clip together 3D print more